Відео

Good video

You mentioned posting another video on how to test your solenoid, to know if it needs replacing. Did you post that one? Thanks much.

Thank you for this.

Did you ever make the video on how to test it?

You are right up too date cool !

I am a auto body repair man ,you did a good job sir,I know you did not use a sanding block but it looks good.

Thank god you put the graph of correct oil levels on a dipstick at the end of your video. All the other morons on UA-cam explaining oil levels dont even show this simple graph showing safe and non safe levels. The best videos show graphs.

Can you show us how to disconnect the drawer in the Front

Please help🚨 I have a 2014 Yamaha YDREX4 golf cart. I need to replace solinoid.....can't figure out where it is located.

😂😂😂

Thank you for sharing such a great job I just did same thin with my wife van and she is not happy but seeing your video now I'm feel confident to do it my self You did a great job

Would this correct water coming in during a car wash on my 05 Buick lacrosse drivers side door?

Anyone know where to buy a replacement?

Just got my car back from the shop and it had this exact problem. Dad had an old rachet set but it seems too big to fit into the area. What type of rachet did you use? Also I have an old rusted car, will the bolts be difficult to loosen? We are hoping to fix this ourselves. Thank you for the great video!

Ty! Trying this out tomorrow. Don’t want to pay for it if I can do it myself.

Great tutorial! I just installed my first fan.

I put this stuff in radiator but now i have high coolent temp code, how to remove this stuff from radiator ?

If you were going to repaint the entire bumper, how many cans of base coat do you think you would need?

OMG... THANK YOU!! I have a Bad Boy Buggy, ordered the solenoid and then discovered that I had TWO that had a connector joining the two. Replaced one and nothing.... ordered another and replaced the 2nd one today and I'm ROLLING!! I'm a girl with some basic tools. This video was so easy to follow and the install was easy to do. Saved me a trip to the shop.... and no telling how much $$.

Hi Clint. I have a 2003 Club Car DS. I am experiencing what you have described. I turn on the key, place cart in forward or reverse and nothing happens. I wait a minute or two or press the peddle a bunch of times and or flip the forward/reverse switch back and forth...and finally the car will move and act normal until it just stops. Sounds like the solenoid to me based on your video. My question is where is my solenoid located on my cart? I can't seem to find it anywhere around the battery compartment. Thank you!

Thank you 🙏🏼

how to I find the correct battery terminal to connect to?

suppose you could use a come along if needed with this tool

I do have a same brand ceiling fan . But the issue spinning to slow . Do you know why?

Ur amazingggf

Well done man 👏👏👏

Thanks Clint. For me it is easy to pull out the sensor boards, but what made your video SO VALUABLE was when you bypassed the unit with a Jumper, and you showed Clearly what pins to bypass. That was fantastic. I have not done this yet but will today June 4th 2024. I originally felt that I might be able to repair the bad component but the replacements are cheap and easy to get so just get them off Amazon and move on. Thanks again for the video.

You should always put your blades on first ain't nothing worse than trying to put blades on when you're on a ladder

I'm reading the comments haven't even got the video yet I got a feeling this guy is a bleep bleep to his son. I own a business called Bowman's handyman and painting. This business was previously owned by my father. Do I worked under for 20 years. So you don't want to get older and regret treating your son the way that you are. You let him do him. He's going to be okay. My dad now regrets being very hard to be around and work for. My dad is now retired and lives in regret because of him always nitpicking about our work I mean our work cuz he had three other kids. I pretty much shut down and stop listening to him and I started learning things on my own because him teaching me was a mess cuz he was so rude and aggressive about it. So now I know what I know not because my father which is a shame I should be taught by him. You don't want your son shutting down on you. Because he will get tired of it.

Hi there. For the garage opener that I have. Genie Model 2028. Where do I insert the wires of the Go Control?

We bought a house that has a couple rooms with this fan model. They have a little bit of a wobble in them, but when we initially turn them on, the blades shake back and forth as though they're doing some sort of self-balancing before spinning up in the correct direction. Are they defective, or is this normal? The manual I found online doesn't mention anything about balancing during installation. Thanks!

Is the brace on the bottom blot necessary?

I'm about to do the same thing for the 1st time in my life and you have given me the confidence to do it however all the videos I have seen say to use 2K clear coat for a better gloss

I got a weird cover under the oil cap.. what is it? I cant put oil in 1999 lexus es300

9/16" bolts on a Honda? Dude, seriously?

Anyone have a link to the replacement parts? Aftermarket preferred since I'm sure it'll be cheaper

Good instructional video. The only thing that would make the video better would be deleting all the negative comments about your son. He did a great job! You’re lucky he even wants to work with you after you publicly humiliated him with your unnecessary derogatory remarks! Even if your comments were made in jest, they can still hurt and discourage!

hi , so my golf cart runs 6 x 8 volt batteries, had a few issues with them over time due to the initial battery charger cooking the batteries .. that was replaced with another one that was much better , however i would lie to desulfer the batteries but i dont think my current charger does that .. i have one of the NOCO genius 5 chargers but it only seems to do 12v desulfate . also not sure what you mean by finding the right two batteries to connect that charger you are using .. wouldnt it be the first one and the last one ?

Did you make the other video about how to test the solenoid? I’m blind or no? Thanks.

ive watched and heard about the switch falling into the headliner while installing map lights, how can I avoid this?

You saved me a ton of time and money. Thanks!

Rather late in the day now but I repaired and repainted my front bumper which had scratches from parking nerfs when in supermarket car parks and it looks acceptable but I winged it. Now it's the rear bumper which has very deep scratches from where I reversed the car into a stone wall. Ok the sun was in my eyes but no excuse. I have made an 18 point list of everything you have done which includes all the various purchases and I shall follow it to the letter. Having sanded to damaged area now, all I found was that 180 grit didn't do the job and I had to go up to 120 and then finish with 180. But it's a Subaru and the bumper seems to be made of cast iron rather than plastic. That's as far as I've got until the stuff I ordered arrives, but I am now super confident thanks to you of getting an almost perfect finish as you have - unlike with my front bumper repair!

Great video. Very informative and made it very easy to understand every step. Best how-to car video I've seen.

brilliant video - i really enjoyed this and thanks for the upload.

Thanks Clint great video!

How about replacing a coil?

I heard distilled water will steal elements from the metal in the cooling system because distilled water isn't happy water, as if it's unbalanced a little. So, the advice was mostly distilled plus a small amount of tap water.

I would've liked to have seen the missing 5 minjtes you cutout of your engine running. I wanted to see how dirty the rest of the coolant was. Yes, i have better things to do, but i have a FF button.

I bought this kit not realizing that I would have to splice into the system. Im not a fan of creating more potential points of failure especially if using plastic and worm drive clamps.

Your alternator looks easy to replace.